FITRUB 45-50 mm Mounting Clamp Holder for Pipes

FITRUB 45-50 mm Mounting Clamp Holder for Pipes

£17.00
Skip to product information
FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
  • FITRUB 45-50 mm Mounting Clamp Holder for Pipes
FITRUB 45-50 mm Mounting Clamp Holder for Pipes

FITRUB 45-50 mm Mounting Clamp Holder for Pipes

£17.00
Taxes included. Shipping calculated at checkout.

Designed for mounting accessories on objects with a circular cross-section (e.g., halogen spotlights on a pipe). Mounting hole: 8 mm, made of high-quality thermoplastic material with fiberglass content, UV-resistant.


FITRUB QL terminals are used in many industries. Due to their properties, they are particularly well-suited for use in the automotive, electrical engineering, mining, mechanical engineering, food processing, and household appliance industries. They are ideally suited for mounting accessories on special vehicles and anywhere high reliability is required.
Material: FITRUB QL clamps are made of high-quality thermoplastic material with fiberglass content.
FITRUB QL is characterized by the following features:
  • high mechanical strength, stiffness and hardness
  • high impact resistance
  • high mechanical vibration damping
  • Good fatigue resistance
  • Very good abrasion and scratch resistance and low coefficient of friction
  • High heat resistance, permissible operating temperature from -20°C to +80°C continuously and temporarily up to +130°C
  • High chemical resistance, especially to organic solvents, including oils, greases and fuels.
  • Good electrical insulating properties
The FITRUB QL holder's mechanical properties are resistant to UV radiation. Dielectric strength: 18/16 kV/mm. Additional rubber pads are not required to protect the pipe on which the holder is mounted from scratches.
Chemical resistance of the FITRUB QL holder:
  • acetone
  • acetylene
  • Ethyl alcohol
  • ammonia
  • benzene
  • naphtha
  • Salicylic acid
  • Diesel fuel
  • Engine oil
  • brake fluid
  • sulfur
Diameter: 45-50mm
Scope of delivery: 2 mounting clamps, 4 mounting screws and nuts

This fits with:

You might also like

30-day return policy

Take advantage of our extended return window

Tested fit

We stand behind our products – if it doesn't fit, it goes back.

100% buyer protection

Encrypted purchase process & buyer protection from payment providers.