30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Heavy-Duty PU Bushing Kit – Jeep Grand Cherokee WK/WH & Commander XK/XH (2005–2010)
With flange / 31 mm / 15 mm
£321.00
Skip to product information
Heavy-Duty PU Bushing Kit – Jeep Grand Cherokee WK/WH & Commander XK/XH (2005–2010)
£321.00
Taxes included.
Shipping calculated at checkout.
Prepare the suspension of your Jeep Grand Cherokee WK/WH or Commander XK/XH for regular off-road use, high payloads and sustained heavy loads. Soft or worn rubber can allow additional movement at the control arms, rear axle and anti-roll bars.
This blue 85 Shore A heavy-duty polyurethane kit renews the listed front- and rear-suspension positions. Several anti-roll-bar sizes and two front-bush shapes are available.
Key details
- Fits: Jeep Grand Cherokee WK/WH and Jeep Commander XK/XH, 2005–2010
- Version: Heavy-duty off-road
- Material: Polyurethane
- Hardness: 85 Shore A
- Colour: Blue
Select the correct anti-roll-bar version
- Front bush shape: with bead or without bead
- Front anti-roll-bar diameter: 31 or 34 mm
- Rear anti-roll-bar diameter: 15 or 19 mm
Measure each bar directly beside the bush and compare the front-bush shape. Do not select solely by model year or engine.
Firmer location under high loads
The firmer PU limits deformation at the control arms, rear axle links and Panhard rod more strongly. This can retain wheel and axle position more consistently, but can also transmit more impacts, noise and vibration to the body.
Kit contents
- Front lower control arms, rear mounts: 2 PU bushes
- Front lower control arms, front mounts: 2 PU bushes and 2 metal sleeves
- Shock-absorber mounts: 2 PU bushes and 2 metal sleeves
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Rear upper control arms: 4 PU bushes and 4 metal sleeves
- Rear lower control arms: 4 PU bushes and 4 metal sleeves
- Rear Panhard rod: 2 PU bushes and 2 metal sleeves
- Front anti-roll bar: 2 PU bushes in the selected shape and size
- Rear anti-roll bar: 2 PU bushes in the selected size
Installation note
At the designated front positions, remove only the old rubber and retain the original outer metal shell. Assign all bushes and sleeves clearly before removal and inspect all arms and mounts for wear or deformation.
Choose version
These versions have different hardness levels and recommended uses.