30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Jeep Wrangler TJ Off-Road PU Bushing Set
£142.00
Skip to product information
Jeep Wrangler TJ Off-Road PU Bushing Set
£142.00
Taxes included.
Shipping calculated at checkout.
Prepare both solid axles of your Jeep Wrangler TJ for demanding off-road use and higher loads. The control arms and Panhard rods locate the axles; soft or worn original rubber can allow additional movement under braking, acceleration and steering inputs.
This blue heavy-duty polyurethane kit uses 85 Shore A for the control-arm bushes and 90 Shore A for the Panhard-rod bushes.
Key details
- Fits: Jeep Wrangler TJ, 1997–2006
- Version: Heavy-duty off-road
- Control-arm hardness: 85 Shore A
- Panhard-rod hardness: 90 Shore A
- Colour: Blue
- Material: Polyurethane
Firmer axle location
The firmer PU can reduce deformation at the control arms and Panhard rods under load. This can also increase the transfer of impacts, noise and vibration. For steering shimmy or vibration, inspect joints, tie rods, steering damper, wheel bearings, wheels and tyres as well.
Kit contents
- Front lower control arms: 4 PU bushes and 4 metal sleeves
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Rear lower control arms: 4 PU bushes and 4 metal sleeves
- Rear upper control arms: 4 PU bushes and 4 metal sleeves
- Panhard rods: 3 PU bushes in 90 Shore A and 3 metal sleeves
Installation note
At the designated control-arm positions, remove only the old rubber; the original outer metal shell remains in the arm. Do not damage or press out these shells. Check axle position, steering and all fasteners after installation.
Choose version
These versions have different hardness levels and recommended uses.