30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
PU Bush Kit – Mitsubishi Pajero III V60/V70 & Pajero IV V80/V90
£271.00
Skip to product information
PU Bush Kit – Mitsubishi Pajero III V60/V70 & Pajero IV V80/V90
£271.00
Taxes included.
Shipping calculated at checkout.
The Mitsubishi Pajero III V60/V70 and Pajero IV V80/V90 use numerous control-arm bushes at the front and rear suspension. When several rubber bushes become soft or worn, small deviations can add up across the suspension and affect wheel guidance.
This orange 75 Shore A polyurethane kit renews the inner bushes of the front control arms, several rear control-arm positions and both anti-roll bars. It is designed for a comprehensive suspension refresh in mixed road, touring and off-road use.
Key details
- Fits: Mitsubishi Pajero III V60/V70 and Pajero IV V80/V90
- Position: Front and rear control-arm bushes and anti-roll bars
- Material: Polyurethane
- Hardness: 75 Shore A
- Colour: Orange
More stable independent-suspension mounting
With independent suspension, every bush influences the position of its respective control arm. Aged rubber can deform more under braking and lateral forces. Polyurethane remains more dimensionally stable and can limit these movements.
This can help provide more defined wheel guidance during steering inputs and load changes. The final result also depends on the condition of the joints, wheel bearings, dampers and other suspension components.
Kit contents
- Front upper control arms, inner bushes: 4 PU bushes and 4 metal sleeves
- Front lower control arms, front and rear inner bushes: 4 PU bushes and 4 metal sleeves
- Rear control arms, axle-side mounting: 2 PU bushes and 2 metal sleeves
- Rear control-arm bushes: 6 PU bushes and 6 metal sleeves
- Additional rear control-arm bushes: 2 PU bushes and 2 metal sleeves
- Rear control arms, frame-side mounting: 2 PU bushes and 2 metal sleeves
- Front anti-roll bar: 2 PU bushes
- Rear anti-roll bar: 2 PU bushes
Installation note
Document the mounting positions before removal. Inspect the control arms and mounts for corrosion or deformation, remove the old bushes completely and clean the contact surfaces. A professional wheel alignment is recommended after installation.
Choose version
These versions have different hardness levels and recommended uses.