30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Heavy-Duty PU Bushing Kit – Nissan Navara D21
£151.00
Skip to product information
Heavy-Duty PU Bushing Kit – Nissan Navara D21
£151.00
Taxes included.
Shipping calculated at checkout.
Prepare your Nissan Navara D21 for demanding off-road use, high payloads and sustained work loads by renewing the key front and rear suspension bushes. The front control arms locate the wheels while the rear leaf springs and shackles guide the axle under load.
This blue 85 Shore A heavy-duty polyurethane kit covers the listed control-arm, leaf-spring and front anti-roll-bar mounting points.
Key details
- Fits: Nissan Navara / Pick-up D21
- Position: Front control arms, rear leaf springs, shackles and front anti-roll bar
- Version: Heavy-duty off-road
- Material: Polyurethane
- Hardness: 85 Shore A
- Colour: Blue
More stable wheel and axle location
The firmer PU deforms less than aged rubber under braking, cornering and payload forces. This can help the front control arms retain wheel position more precisely and allow the leaf springs and shackles to guide the rear axle more consistently around their intended pivot points.
The firmer connection can transmit more impacts, noise and vibration to the chassis and body. Worn spring bolts, shackles, joints or deformed control arms must be replaced separately.
Kit contents
- Front upper control arms: 4 PU bushes and 4 metal sleeves
- Front lower control arms: 2 PU bushes and 2 metal sleeves
- Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
- Front mounts of the rear leaf springs: 2 PU bushes and 2 metal sleeves
- Rear leaf-spring mounts: 2 PU bushes and 2 metal sleeves
- Leaf-spring shackles: 2 PU bushes and 2 metal sleeves
- Anti-roll-bar links: 8 PU bushes
- Front anti-roll bar: 2 PU bushes
Important note on the upper control arms
The original outer metal sleeves remain in the front upper control arms. Remove only the old rubber without damaging these sleeves; the new PU bushes are installed into the retained original sleeves.
Installation note
Inspect all control arms, spring bolts, shackles, the anti-roll bar and mounting points for corrosion, scoring or deformation. Suspension work should be carried out professionally.
Choose version
These versions have different hardness levels and recommended uses.