30-day return policy
Take advantage of our extended return window
Tested fit
We stand behind our products – if it doesn't fit, it goes back.
100% buyer protection
Encrypted purchase process & buyer protection from payment providers.
Heavy-Duty XXL Eccentric PU Bushing Kit – Nissan Patrol Y60/Y61 2.8 TD, 50 mm Lift
15 mm / 15 mm
£187.00
Skip to product information
Heavy-Duty XXL Eccentric PU Bushing Kit – Nissan Patrol Y60/Y61 2.8 TD, 50 mm Lift
£187.00
Taxes included.
Shipping calculated at checkout.
Prepare your lifted Nissan Patrol Y60 or early Y61 2.8 TD for demanding off-road use with one comprehensive heavy-duty XXL kit. A suspension lift reduces front-axle caster, while soft rubber at the control arms, Panhard rods and anti-roll bars can allow additional movement under high loads.
This blue 85 Shore A polyurethane set combines eccentric caster-correction bushes, firmer axle-location bushes and anti-roll-bar bushes in the diameters selected for your vehicle.
Key details
- Fits: Nissan Patrol Y60 2.8 TD, 1987–1997, and Y61 2.8 TD, 1998–2000
- Application: Approximately 50 mm / 2 in suspension lift
- Version: Heavy-duty XXL kit including anti-roll-bar bushes
- Material: Polyurethane
- Hardness: 85 Shore A
- Colour: Blue
Measure both anti-roll bars before ordering
The option name lists the front diameter first and the rear diameter second.
- Front anti-roll bar: 15, 21 or 24 mm
- Rear anti-roll bar: 15 or 17 mm
Measure directly on a clean section of each bar. Rust, thick paint or dirt can distort the reading.
Caster correction and heavy-duty location
The eccentric bushes can partially restore caster reduced by the lift. The firmer PU also limits deformation more strongly than the orange standard version, helping the suspension retain its axle location under high loads. The trade-off can be increased impact, noise and vibration transfer.
Kit contents
- Front control arms, axle side: 4 eccentric PU bushes and 4 metal sleeves
- Front control arms, chassis side: 4 PU bushes
- Front and rear Panhard rods: 2 PU bushes and 2 metal sleeves for each rod
- Rear upper and lower control arms: 4 PU bushes and 4 metal sleeves for each pair
- Frame-side rear lower control-arm mounts: 2 additional PU elements
- Front anti-roll bar: 2 PU bushes in the selected diameter
- Rear anti-roll bar: 2 PU bushes in the selected diameter
Installation note
Install the eccentric bushes only in the specified rotational position. Check caster, axle position and suspension geometry professionally after fitting.
Choose version
These versions have different hardness levels and recommended uses.