XXL PU Bushing Kit – Nissan Patrol Y61 3.0

• Nissan

• Patrol Y61

Renew the major axle-location and anti-roll-bar bushes on your Nissan Patrol GR Y61 3.0 with one comprehensive XXL kit. When several control-arm, Panhard-rod and anti-roll-bar bushes are worn, replacing a single mounting point will not restore consistent axle location throughout the suspension.

This orange 75 Shore A polyurethane set is designed for road use, overland travel and mixed off-road driving. It uses regular centred bushes and includes selectable front and rear anti-roll-bar sizes.

Key details

• Fits: Nissan Patrol GR Y61 3.0, 2000–2004
• Version: XXL kit with regular centred bushes
• Front anti-roll bar: Select 15, 21 or 24 mm
• Rear anti-roll bar: Select 15 or 17 mm
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Assembly grease: Included

Measure both anti-roll bars before ordering

Measure the outside diameter of the front and rear bars directly beside their bushes. Select the combination that matches the vehicle, for example 21 mm front and 17 mm rear.

Kit contents

• Front control arms, axle side: 4 regular centred PU bushes
• Front control arms, frame side: 4 PU bushes
• Front Panhard rod: 2 PU bushes and 2 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Frame side of the rear lower control arms: 2 spacer / thrust washers
• Front anti-roll bar: 2 PU bushes in the selected size
• Rear anti-roll bar: 2 PU bushes in the selected size
• Assembly grease

Centred bushes – no caster correction

The front axle-side bushes are regular and centred. Lifted vehicles may require an eccentric caster-correction solution depending on the actual measured geometry.

Installation note

Carry out the work axle by axle and inspect all arms, bolts and mounts. After installation, check every fastener together with the axle and steering geometry.