Opel Frontera B PU Bushing Set

• Opel

• Frontera B

Renew the main front- and rear-suspension bushes on your Opel Frontera B and restore more controlled wheel and axle movement. Soft or worn original rubber can allow additional movement at the control arms, rear axle links, Panhard rod and anti-roll bars.

This orange 75 Shore A polyurethane kit is designed for road use, overland travel and mixed off-road driving.

Key details

• Fits: Opel Frontera B, 1999–2004
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange

More defined wheel and axle location

Polyurethane deforms less than aged rubber under braking, drive and lateral forces and can reduce unwanted movement at the control arms and rear axle. The final result also depends on joints, wheel bearings, dampers and steering components.

Kit contents

• Front lower control arms: 2 PU bushes and 2 metal sleeves
• Frame-side front lower control-arm mounts: 2 PU bushes and 2 metal sleeves
• Front upper control arms: 4 PU bushes
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Rear anti-roll bar: 2 PU bushes
• Rear anti-roll-bar links: 4 PU bushes

Installation note

Remove the old bushes completely, clean all contact surfaces and inspect the arms and mounts for wear or deformation. Suspension and axle-location work should be carried out professionally.