Suzuki Grand Vitara FT/GT PU Bush Set

• Suzuki

• Grand Vitara FT/GT

On the Suzuki Grand Vitara FT/GT, the front control-arm bushes influence wheel guidance, while the rear trailing arms and Panhard rod locate the rear axle. When several rubber bushes become soft or worn, the vehicle can feel less precise during steering and load changes.

This orange 75 Shore A polyurethane kit renews these mounting points together with the front anti-roll bar. It is designed for a comprehensive overhaul for predominantly road and touring use with occasional off-road driving.

Key details

• Fits: Suzuki Grand Vitara FT/GT, 05/1999–09/2005
• Version: Front- and rear-suspension kit
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Metal sleeves and assembly grease: Included

More defined front- and rear-axle location

Aged rubber deforms more under braking, lateral and drive forces, which can temporarily alter the position of the front control arms and rear axle. Polyurethane retains its shape more consistently and can reduce this unwanted movement.

This can support more defined wheel guidance, more stable lateral location of the rear axle and more direct anti-roll-bar response. The 75 Shore A specification remains suited to versatile everyday and touring use.

Kit contents

• Front lower control arms, front mounts: 2 PU bushes and 2 metal sleeves
• Front lower control arms, rear mounts: 2 PU bushes and 2 metal sleeves
• Rear lower trailing arms: 4 PU bushes and 4 metal sleeves
• Rear upper trailing arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Anti-roll-bar link bushes: 4 PU bushes
• Assembly grease

Installation note

Remove the old bushes completely and clean the mounting points thoroughly. Use the supplied assembly grease on the specified contact surfaces. Suspension and axle-location work should be carried out professionally, and all fasteners should be rechecked after installation.