Toyota Land Cruiser 70/73 up to 1991 PU Bushing Set

• Toyota

• Land Cruiser 70

Renew the axle-location bushes on your early Toyota Land Cruiser 70/73 and restore more controlled movement of both solid axles. The radius arms locate the axles longitudinally while the Panhard rods control lateral movement.

This orange 75 Shore A polyurethane kit is designed for road use, overland travel and mixed off-road driving.

Key details

• Fits: Toyota Land Cruiser LJ70, RJ70, LJ73 and RJ73
• Production period: 11/1984–02/1991
• Position: Front and rear radius arms and Panhard rods
• Material: Polyurethane
• Hardness: 75 Shore A
• Colour: Orange
• Metal sleeves and assembly grease: Included

More defined solid-axle location

Polyurethane deforms less than aged rubber under braking, drive and lateral forces and can help the radius arms and Panhard rods retain axle position more consistently. The final result also depends on joints, steering, wheel bearings and dampers.

Kit contents

• Front radius arms, axle side: 4 PU bushes and 4 metal sleeves
• Front radius arms, frame side: 4 PU bushes
• Rear radius arms, axle side: 4 PU bushes and 4 metal sleeves
• Rear radius arms, frame side: 4 PU bushes
• Front Panhard rod: 2 PU bushes and 2 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Assembly grease

Installation note

Inspect all radius arms, Panhard rods, bolts and mounts for wear or deformation. Remove the old bushes completely, clean the contact surfaces and use the supplied grease.