Polybuchsen Exzenter Set Toyota Land Cruiser 70 ab 1991

Eccentric PU Bushing Kit – Toyota Land Cruiser 70/73, 50 mm Lift

35 mm
£160.00
Skip to product information
Polybuchsen Exzenter Set Toyota Land Cruiser 70 ab 1991

Eccentric PU Bushing Kit – Toyota Land Cruiser 70/73, 50 mm Lift

£160.00
Taxes included. Shipping calculated at checkout.
Width
  • Toyota
  • Land Cruiser 70

Combine partial caster correction with more controlled axle location on your Toyota Land Cruiser 70 Series lifted by approximately 50 mm / 2 inches. A suspension lift reduces front-axle caster and can affect steering self-centring and straight-line stability.

This orange 75 Shore A polyurethane kit uses eccentric bushes at the axle-side mounts of the front control arms together with regular bushes for the remaining front and rear positions.

Key details

  • Fits: Toyota Land Cruiser 70 Series from 1991
  • Application: Approximately 50 mm / 2 in suspension lift
  • Options: 35 or 40 mm width at the frame-side control-arm mounts
  • Material: Polyurethane
  • Hardness: 75 Shore A
  • Colour: Orange

Measure before ordering

Measure the width of the existing frame-side bushes or control-arm mounts. Your selected option determines whether the kit includes the 35 or 40 mm positions.

Caster correction with eccentric bushes

The offset bore repositions the front axle within the mounting point and can partially restore caster reduced by the lift. The result depends on the springs, actual lift height, arms, axle position and condition of the complete suspension.

Polyurethane retains its shape better than aged rubber and helps maintain the adjusted geometry more consistently. This kit does not replace professional alignment.

Kit contents

  • Front control arms, axle side: 4 eccentric PU bushes and 4 metal sleeves
  • Front control arms, chassis side: 2 PU bushes and 2 metal sleeves in the selected width
  • Rear control arms, axle side: 4 PU bushes and 4 metal sleeves
  • Rear control arms, chassis side: 2 PU bushes and 2 metal sleeves in the selected width
  • Front Panhard rod: 2 PU bushes and 2 metal sleeves
  • Rear Panhard rod: 2 PU bushes and 2 metal sleeves

Installation note

Install the eccentric bushes in the specified rotational position. Incorrect orientation can move the geometry in the wrong direction. Check caster, axle position and steering behaviour professionally after fitting.

This fits with:

You might also like

30-day return policy

Take advantage of our extended return window

Tested fit

We stand behind our products – if it doesn't fit, it goes back.

100% buyer protection

Encrypted purchase process & buyer protection from payment providers.