Toyota Land Cruiser 80 Off-Road Eccentric PU Bushing Kit – 50 mm Lift

• Toyota

• Land Cruiser 80

Combine partial caster correction with heavy-duty axle-location bushes on your lifted Toyota Land Cruiser 80. A suspension lift reduces front-axle caster, while aged rubber in the control arms and Panhard rods can allow additional axle movement.

This blue 85 Shore A polyurethane kit uses eccentric bushes at the axle-side mounts of the front control arms together with regular bushes for the remaining front and rear positions. It is intended for approximately 50 mm / 2 inches of suspension lift.

Key details

• Fits: Toyota Land Cruiser J80, 05/1990–03/1998
• Application: Approximately 50 mm / 2 in suspension lift
• Version: Heavy-duty off-road with eccentric front bushes
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue

Caster correction with eccentric bushes

The offset axle-side bushes reposition the front axle within the control-arm mounting points and can partially restore caster reduced by the lift.

The actual geometry depends on the true lift height, springs, control arms, axle position and condition of the complete suspension. The supplied installation template assists with orientation but does not replace professional alignment.

More stable axle location under high loads

The firmer PU deforms less than aged rubber under braking, drive and lateral forces. This can help the control arms and Panhard rods locate the axles more precisely and retain the adjusted geometry more consistently.

The firmer mounting can also transmit more impacts, noise and vibration to the chassis and body.

Kit contents

• Front control arms, axle side: 4 eccentric PU bushes and 4 metal sleeves
• Front control arms, chassis side: 2 PU bushes and 2 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Front Panhard rod: 2 PU bushes and 2 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Installation template for the eccentric bushes

Installation note

Install the eccentric bushes precisely in the specified rotational position. After fitting, have caster, axle position, steering-wheel position and suspension geometry checked professionally.