Heavy-Duty PU Bushing Kit – Toyota Land Cruiser J80 / J105

• Toyota

• Land Cruiser 80

Prepare your Toyota Land Cruiser 80 or solid-axle 105 Series for demanding off-road use, high payloads and sustained heavy loads by renewing the major axle-location bushes. Soft or worn original rubber can allow unwanted longitudinal and lateral movement of the solid axles.

This blue 85 Shore A heavy-duty polyurethane kit covers the listed front and rear control-arm and Panhard-rod mounting points.

Key details

• Fits: Toyota Land Cruiser J80, 05/1990–03/1998, and J105 versions with solid axles
• Position: Front and rear control arms and Panhard rods
• Version: Heavy-duty off-road
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue

More stable axle location under high loads

The firmer PU deforms less than aged rubber under braking, drive and lateral forces. This can help the control arms guide the axles more precisely in the longitudinal direction while the Panhard rods limit lateral movement.

The firmer mounting can also transmit more impacts, noise and vibration to the chassis and body. Worn joints, bolts, mounts, wheel bearings or steering components must be repaired separately.

Kit contents

• Front control arms, axle side: 4 PU bushes and 4 metal sleeves
• Front control arms, chassis side: 2 PU bushes and 2 metal sleeves
• Rear upper control arms: 4 PU bushes and 4 metal sleeves
• Rear lower control arms: 4 PU bushes and 4 metal sleeves
• Front Panhard rod: 2 PU bushes and 2 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves

Installation note

Inspect all control arms, Panhard rods, bolts and mounting points for corrosion, elongated holes or deformation. Suspension work should be carried out professionally and the geometry checked after installation.