Heavy-Duty PU Bush Kit – Toyota Land Cruiser J90/J95

• Toyota

• Land Cruiser 90
• Land Cruiser 95

A Toyota Land Cruiser 90/95 with a high payload, heavy touring build or regular off-road use places substantially greater loads on its suspension bushes than normal road driving. Soft or worn rubber bushes allow additional movement of the control arms and rear axle under these forces.

This complete blue 85 Shore A kit renews the mounting points at the front and rear suspension, including the Panhard rod and anti-roll bars. The Heavy Duty setup deforms less than the orange standard version and prioritises precise control over maximum comfort.

Key details

• Fits: Toyota Land Cruiser / Prado 90 and 95, 01/1996–01/2003
• Version: Heavy Duty Off Road for front and rear suspension
• Material: Polyurethane
• Hardness: 85 Shore A
• Colour: Blue
• Rear anti-roll bar: Select 16 or 19 mm
• Metal sleeves and assembly grease: Included

Dimensional stability under high suspension loads

Aged rubber can deform significantly under braking, drivetrain and lateral forces. This changes the position of the control arms, trailing arms and axle. The firmer polyurethane used in this version deforms less and can help keep suspension geometry more consistent under load.

This can provide more defined responses to steering inputs and load changes off road and with high payloads. In return, impacts, noise and vibration may be transmitted more noticeably than with softer bushes.

Kit contents

• Front lower control arms: 4 PU bushes and 4 metal sleeves
• Front upper control arms: 4 PU bushes and 4 metal sleeves
• Rear upper trailing arms: 4 PU bushes and 4 metal sleeves
• Rear lower trailing arms: 4 PU bushes and 4 metal sleeves
• Rear Panhard rod: 2 PU bushes and 2 metal sleeves
• Front anti-roll bar: 2 PU bushes
• Front anti-roll-bar link bushes: 4 PU bushes
• Rear anti-roll bar: 2 PU bushes in the selected size
• Assembly grease

16 or 19 mm – please measure

Different rear anti-roll-bar diameters were fitted. Measure the outside diameter of the bar directly in the bush area. Model year and engine alone are not sufficient for a reliable selection.

Installation note

Remove the old bushes completely and clean the mounting points. Use the supplied assembly grease on the specified contact surfaces. Suspension and axle-location work should be carried out professionally, and all fasteners should be checked afterwards.